Standard and metric rulers make small measurements a snap.
Standard ¼” drive socket accepts any ¼” bit to turn any type of screw. TIP: if lots of pressure or torque is required, then insert lighter upside down into sleeve, so bit presses against the lighter’s flint wheels and crank away.
LighterBro Pro securely holds a ¼” #3 Phillips screwdriver bit at the bottom of the sleeve so you can conveniently tighten your snowboard bindings. Locking #3 Phillips bit is included with LighterBro® Pro. TIP: remove bit to get lighter to bottom of sleeve.
5/16” and 3/16” sockets are also included for convenience.
A shackle key or wing nut wrench is conveniently located on the side of the LighterBro® Pro, helping sailors and boaters conveniently get the job done. TIP: extend the lighter part way out of the sleeve for more leverage when the turning gets hard.
Two Nut Grabber wrenches located on the side of the LighterBro® Pro securely grip any size nut or bolt that fits in its jaws be it standard, metric size or even badly stripped. One Nut Grabber loosens and one tightens. TIP: if the bolt head is too big, slide it through at an angle and try using the gripping teeth on the shaft of the bolt or screw.
The round hole opposite the ¼” drive is a secure attachment point for a carabiner or lanyard.